Ridge Ventilator covers the ridge line of ‘A’ type truss buildings to provide fresh air circulation inside the building. Louvers on either sides of assembly allow fresh air to flow-in and stale air to flow-out to atmosphere and effectively maintain the air ventilation of the building through natural draught system. A single ventilator assembly or many in tandem can be installed depending on the building size & ventilation requirement.
Model “MAXI “ – Main frame and cradle are fabricated in steel hollow sections and other panels are made using either pre-painted galvalume/galvanized steel or bare-galvalume steel. It is suitable for large sized industrial sheds demanding more ventilation. It is available in customized sizes and colors.
Model “MINI” – All the components are made using either pre-painted galvalume/galvanized steel or bare-galvalume steel. It is suitable for commercial and industrial sheds of small and medium sizes. It is available in a standard size of 2100(L) x 600(W) X 500(H) mm in different colors.
Louvered Metal Door is designed to provide air ventilation inside the room. It has a series of louver blades fixed to hollow steel frame to form the door panel. Door frame is hinged to outer frame and fixed with suitable door handle and locks. Frames are fabricated from GP/CR/HR steel hollow sections and other panels are made from either pre-painted galvalume/galvanized steel or bare-galvalume steel.
Apron flashings and Drip trims are normally fixed at the end of the wall panel to guide the rain water away from the wall plane. The bottom edge of such flashing is not stiff enough to have straight edge and good finish. Hemming is the process of bending the sheet edge to 180 degrees to provide additional stiffness and good finish.